Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 26)

Chapter 2: Hardware setup 2-4
2.2 Motherboard information
The barbone server comes with the DSBV-D motherboard already installed.
The motherboard is secured to the chassis by six (6) screws as indicated
by the circles in the illustration below.
Make sure to unplug the chassis power cord before installing or removing
the motherboard. Failure to do so can cause you physical injury and dam-
age motherboard components!
Place this side towards
the rear of the chassis
DSBV
-D
Refer to "Chapter 4 Motherboard information" for detailed information
on the motherboard.