beautypg.com

Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual

Page 70

background image

Chapter 2: Hardware setup

2-48

To remove the power supply unit (PSU):
1. Remove the chassis cover. Refer to section “2.1.1 Removing the side

cover.”

2. Lay the chassis on a flat, stable surface.
3. Locate the four screws on the

rear panel. Remove the screws

and set them aside.

4. Locate and remove the screws

that secure the PSU bracket to

the chassis.

5. Slide the bracket in the direction

of the arrow and remove it from

the chassis.

This manual is related to the following products: