Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 43)

2-21 ASUS TS500-E4
2. Press the dummy cover into the
slot opening until the hook tab
clicks in place.
3. When installed, the dummy cover
appears as shown.
2.7.2 Installing an HDD dummy cover
The HDD dummy covers come pre-installed on the front panel bezel. In case
you removed the covers, follow these steps to re-install them.
To install an HDD dummy cover:
1. From the inside of the front panel assembly, insert the flat end of a
dummy cover into the slot as
shown. The end with the hook tab
should be close to the front panel
LEDs.
Flat end
Hook tab