Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual
Page 128
5-34
Chapter 5: BIOS information
The following items appear only if you set the Com Port Address item to
[On-board COM A] or [On-board COM B].
Baud Rate [115.2K]
Allows you to enable the specified baud rate. Configuration options: [300]
[1200] [2400] [9600] [19.2K] [38.4K] [57.6K] [115.2K]
Console Type [PC-ANSI, 7bit]
Allows you to enable the specified console type. Configuration options:
[VT100] [VT100, 8bit] [PC-ANSI, 7bit] [PC ANSI] [VT100+] [VT-UTF8]
[ASCII]
Flow Control [CTS/RTS]
Allows you to select the flow control for console redirection. Configuration
options: [None] [XON/XOFF] [CTS/RTS]
Console connection [Direct]
Allows you to select the console connection. [Direct] indicates that the
console is connected directed to the system. [Via modem] indicates that a
modem is used to connect. Configuration options: [Direct] [Via modem]
Continue C.R. after POST [Off]
Set this item to [On] if you want console redirection to continue after the
operating system has loaded. Configuration options: [Off] [On]
# of video pages to support [1]
Allows you to set the number of video pages to allocate for console
redirection when the video hardware is not available. Press <-> or <+> to
set the value, or enter the value using the numeric keypad. Configuration
options: [1] ~ [8]