Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 119)

ASUS TS500-E4 5-25
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Enable USB host
controller.
ICH USB Control Sub-Menu
USB Function [Enabled]
USB 2.0 Controller [Enabled]
Legacy USB Support: [Enabled]
PhoenixBIOS Setup Utility
Advanced
5.4.4 ICH USB Control Sub-Menu
The items in this menu allow you to display the USB configuration settings.
Select an item then press to display the configuration options.
USB Function [Enabled]
Allows you to enable the USB host controller. Configuration options:
[Disabled] [Enabled]
The following items appear only if you enable the USB Function item.
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller. Setting this
item to [Enabled] allows the built-in high speed USB support in the
BIOS to turn on automatically when you install high speed USB devices.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Setting to [Enabled] allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. if no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled]