Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 65)

2-43 ASUS TS500-E4
2.10.6 Front I/O board
You need to remove the front panel assembly before you can remove
the front I/O board. Refer to section “2.5.1 Removing the front panel
assembly” for instructions.
To remove the front I/O board:
1. Remove the screw that secures
the front I/O board bracket to the
front panel.
4. Remove the screw that secures
the I/O board to the bracket.
2. Carefully pull out the bracket until
you see the cables connected to
the I/O board.
3. Disconnect all the cables from the
I/O board.