Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 115)

ASUS TS500-E4 5-21
5.4.2 Chipset Configuration
This menu shows the chipset configuration settings. Select an item then
press to display a pop-up menu with the configuration options.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Enable Configuration/
Memory mapped accesses
to the Crystal Beach
Configuration space
located in
Device 8, Fn 0, and Fn 1.
Chipset Configuration
Crystal Beach Configure Enable [Enabled]
SERR Signal Condition [Single Bit]
Demand Scrub Enable [Enabled]
Patrol Scrub Enable [Enabled]
4GB PCI Hole Granularity [256 MB]
Memory Branch Mode [Interleave]
Branch 0 Rank Interleave [4:1]
Branch 0 Rank Sparing [Disabled]
Enhanced x8 Detection [Enabled]
Force ITK Config Clocking [Disabled]
FBDIMM(s) Thermal Throttling [Open Loop]
Open Loop Type [Best Performan]
Environment Temperature [025 O C]
PhoenixBIOS Setup Utility
Advanced
Scroll down to display the following item:
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Temperature Rise [025 O C]
FBDIMM(S) Air Flow [2.0]
Echo TPR [Disabled]
Configuration options: [Disabled] [Enabled]
Discrete MTRR Allocation [Disabled]
Configuration options: [Disabled] [Enabled]
Intel EIST support [Enabled]
Enables or disables EIST support. Configuration options: [Disabled] [Enabled]
No Execute Mode Mem Protection [Enabled]
Configuration options: [Disabled] [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Configuration options: [Disabled] [Enabled]
Set Max Ext CPUID = 3 [Disabled]
Enable this item to boot legacy operating systems that cannot support
CPUs with extended CPUID functions. Configuration options: [Disabled]
[Enabled]