Kolpin 10-0520 X-Factor Plow - Manual (Page 14)

14
© 2011 Kolpin Outdoors Inc.
STEP 4 - INSTALL FORWARD MOUNT
TO ATV:
1. Install the Forward Mount Kit CYC6043 onto your
ATV, following the assembly instructions contained
with the kit.
BEFORE YOU BEGIN:
• Please read and understand all instructions.
• Verify all parts and tools are accounted for.
• To ensure a satisfactory installation, follow all steps
correctly and in the sequence described.
• All directions referring to right and left are when the
rider is sitting on the machine
INSTALLATION NOTES:
TOOLS REQUIRED:
• Basic Hand Wrench and Socket Set
• Torque Wrench
• Plastic Cutting Tool
NOTICE
Position fasteners of the Forward Mount against the
frame as closely as possible - See Illustration
ATV FRONT
Position mount fasteners as shown to create a wedge
clamp force at the frame ‘Y’
INCORRECT
NOTICE
Depending on application, some trimming of plastic guards
or panels may be required to install the Forward Mount.
NOTICE
Refer to Version A, B, C or D for Forward Mount
installation, depending on your application.