Kolpin 85180 – Suzuki Swing Axle 2 Receiver Hitch - Manual

Rev.3
85180 – Suzuki Swing Axle 2” Receiver Hitch
Hitch Assembly:
1. Using the 4 -5/16” bolts provided, loosely attach the Hitch Tube Weldment to the two brackets
provided. Secure with flat washer and Nylock nut provided.
Hitch Mounting:
1. Remove the (4) 10mm bolts that hold the stock hitch on the ATV. Remove OEM Hitch.
2. Mount DirtWorks hitch (85180) to the same holes that the existing hitch was in and attach using
the same OEM bolts that you just removed.
3. Tighten down the Receiver Hitch Plate to the Left and Right Side Plates, making sure that the
Hitch is level horizontally while tightening.
Hitch Use:
• The 2” Receiver hitch is designed to allow you to quickly and easily mount and dismount the
DirtWorks 3-Point Hitch system.
• Kolpin recommends the use of the DirtWorks Suspension Lock with the use of the DirtWorks
system.
• The hitch can also be used for chores around the house, such as moving your boats, trailers, etc.
Hitch Compatible With:
1. 2003-current Suzuki Vinson 500
2. 2003-current Suzuki Eiger 400
Kolpin Powersports, Inc.
205 N. Depot St., Fox Lake, WI
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
[email protected]
Description Quantity
Left Side Plate 1
Right Side Plate 1
Hitch Tube Weldment 1
5/16” x 1.25” Grade 8 Bolt 4
5/16” Grade 8 Nylock Nut 4
5/16” Flat Washer 8
5/8” x3.00” Bent Hitch Pin 1
R-Pin 1
Instruction Manual 1