Kolpin 85150 – Swing Axle Honda Hitch - Manual

85150 – Swing Axle Honda Hitch
Description Quantity
Honda Receiver Hitch 1
1/2” U-Bolt 1
1/2” Nylock Nut 2
1/2” Flat Washer 2
3/4” x 1 1/2” Hex Bolt 1
3/4” Flat Washer 2
3/4” Lock Washer 1
5/8” x 3” Bent Hitch Pin 1
R-Pin 1
Manual 1
Hitch Mounting:
1. Place receiver hitch as shown above over the frame of the ATV rear suspension.
2. U-Bolt from under the frame and through the Hitch Plate.
3. Attach using the ½” Washers and Nuts provided. (See Above Photo)
4. Using ¾” Hex Bolt, insert ¾” lock washer and ¾” flat washer onto bolt and insert through the
existing hitch and thread into Kolpin DirtWorks Honda Receiver Hitch.
Hitch Use:
• The 2” Receiver hitch is designed to allow you to quickly and easily mount and dismount the
DirtWorks 3-Point Hitch system.
• Kolpin recommends the use of the Universal Swing Arm Suspension Lock with the use of the
DirtWorks System.
• The hitch can also be used for chores around the house, such as moving your boats, trailers, etc.
*Do not exceed the Manufactures Recommended Hitch Capacity*
Hitch Compatible With:
1. TRX 500 FA Rubicon 4x4 - 04 & Older
2. TRX 400 S Foreman 4x4 - 04 & Older
3. TRX 400 Automatic 4x4 – 2004
4. TRX 500 Foreman 4x4 – 2005
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
[email protected]