Kolpin 91710 – Bucket Hugger - Manual

Bucket Hugger Optional Mounting Instructions
Handle Attachment (Removable):
You may secure your new Kolpin ATV Luggage to your ATV by attaching bungee cords
or ratchet straps to the Bucket Hugger handles and then to your ATV. For permanent
attachment, we have enclosed a hardware kit.
Hardware Attachment (Permanent):
Hardware is to be chosen by what type of ATV rack being attached to. Additional holes
may need to be drilled out on the bottom of the Bucket Hugger for installation. Slots on
the bottom of the Bucket Hugger have been provided for locating the new holes. Once
you have chosen your hole pattern, simply attach the Bucket Hugger with the provided
hardware.
Hardware Pack Includes:
4 Plastic Cross Braces
4 Metal
Braces
8 3 ½” x ¼” bolt
8 Nylock
Nuts
1. Check your hardware pack to make sure all components are included.
2. Position the Kolpin Bucket Hugger in the desired position on the rack of the
ATV.
3. Place the plastic cross braces with nut inside, under the rack and attach using the
bolts and the metal braces.
Customer Service
Kolpin Powersports, Inc. P.O. Box 107
205 Depot Street
Fox Lake, WI 53933
Phone: (920) 928-3118
Fax: (920) 928-3782
Internet Address:
www.kolpin.com
Customer Service: [email protected]