Kolpin 85640 –ATV RECEIVER HITCH - Manual

Rev. 1
85640 –ATV RECEIVER HITCH
Kolpin Outdoors, Inc.
205 N. Depot St, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
[email protected]
No. Description Quantity
1 Receiver 1
2 Drawbar 1
3 5/8” x 3.00” Bent Hitch Pin 1
4 R-Pin 1
No. Description Quantity
5 ¾” x 1.75” Hex Head Bolt 1
6 ¾” Nut 1
7 ¾” Star Washer 1
8 ¾’ Lock Washer 1
Hitch Mounting:
1. Place the hitch on the OEM Ball Mount of your ATV.
2. Place the Star Washer between the Kolpin Hitch and the OEM Ball Mount.
3. Insert the ¾” Hex Head Bolt through the hitches.
4. Next, slide on the ¾” Lock Washer Provided, and the ¾’ Nut. Tighten
Securely! See order above for correct attachment!
5. The larger diameter hole is for a standard shank hitch ball. The smaller
diameter hole is for a clevis attachment.
1
2
CLEVIS
BALL
OEM HITCH
KOLPIN HITCH