beautypg.com

Kolpin 90510 – Arctic Cat Prowler Frame Support Kit User Manual

Kolpin Hardware

background image

Rev. 1

90510 – Arctic Cat Prowler Frame Support Kit











Mounting Specific Instructions:
1. On the rear of the machine, attach the Frame Support Kit using the U-Bolts Provided. Mount the Cross
Tube Bracket to the vertical frame located under the dump box. Move the Frame Support as high up on the
frame as possible. Tighten Securely.

2. Place the Adjustable Link in the Cross Tube Bracket. Pin the Clevis end in using the Bent Hitch Pin
provided.

3. Run the adjustable link to the Kolpin 3-Point Unit. Pin the other Clevis end to the three point using the
Bent Hitch Pin provided. You may have to adjust the tube to fit using the Hole Pattern on the tube and
secure using the Lock Pin Provided., then by twisting the tubing you are able to tighten up the Support Kit.

NO. Description QTY.

1

Cross Tube Bracket

1

2 Adjustable

Link

1

3

5/16” x 2.1875” U-Bolt

4

4

5/16” Nylock Nut

8

5 5/16”

Washer

4

6

5/16” Hex Head Bolt

2

7

5/8” x 3” Bent Hitch Pin

3

8 R-Pin

3

9

1/2” Locking Pin

1

Attach using the (4)
U-bolts provided.

Pin in adjustable Link
as shown here.

Kolpin Outdoors, Inc.

205 N. Depot Street, Fox Lake, WI 53933

Phone #: (877) 9KOLPIN or (920) 928-6514

www.kolpinpowersports.com

[email protected]