Kolpin 85190 – Polaris XP - 2 Receiver Hitch User Manual
Kolpin Hardware
Rev. 1
85190 – Polaris XP - 2” Receiver Hitch
Hitch Mounting:
1. Loosen the (2) OEM Nuts from the ATV as pointed out above.
2. Slide the hitch into the OEM 1 ¼” Receiver, making sure that the (2) Top OEM
Bolts slide through the Kolpin Hitch.
3. Place the (2) OEM Nuts back onto the OEM Bolts. Don’t tighten yet!
4. Place the ½” Bolt provide through the 1 ¼” Receiver on the bottom side of the
hitch using (2) ½” Washers, one on each side.
5. Place the ½” Nylon Nut provided on the ½” Bolt.
6. Now that the hitch is all connected to the ATV, Tighten ALL hardware securely,
making sure the hitch is tightened evenly, and the ½’ Bolt is tightened last.
Kolpin Outdoors, Inc.
205 N. Depot St, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
Description
Quantity
XP Hitch Weldment
1
½” - 13 x 2.25” Hex Head Bolt
1
½” Nylon Nut
1
½” Washer
2
5/8” x 3.00” Bent Hitch Pin
1
R-Pin
1
Loosen and
Remove Nuts
- 98010 – Heated Throttle Master (2 pages)
- 98005 – Throttle Master (1 page)
- 10-0520 X-Factor Plow (21 pages)
- 97500 – Quad Carrier (2 pages)
- 53360 – Front Gear Basket (1 page)
- 53350 – Convertible Rear Drop Rack (1 page)
- 53300 - Collapsible Drop Basket (1 page)
- 53200 - UTV BASKET (2 pages)
- 86840 - 4' LIGHT Drag Harrow (2 pages)
- 86360 - ATV SPREADER (8 pages)
- 86300 - Pack Mule ATV Trailer (1 page)
- 86400 – UTV 72” Snow Plow (10 pages)
- 86100 – Chisel Plow_Scarifier (1 page)
- 86850 – TOW BEHIND DISC (9 pages)
- WHS03HD ATV (8 pages)
- WHS03 (5 pages)
- LSR-60 - 60” Landscape Rake (1 page)
- FRB-48_60 – Rear Blade (2 pages)
- BXS4860 – Box Scraper Ends (1 page)
- 20129 – Gun Boot IV Metal Bracket (2 pages)
- 30005 – Bow Boot Bracket (1 page)
- 20090-95 – GUN BOOT 5.0 (1 page)
- 20053 – KOLPIN GUN BOOT 4.3 (2 pages)
- 20035 – Boottector Bracket (1 page)
- 89735 – Fuel Pack Jr. With Bracket (3 pages)
- 89475 – Fuel_Water Pack Bracket (3 pages)
- 89435 – PACK MOUNT (1 page)
- 89135 – FUEL PACK (1 page)
- SL-USA (1 page)
- 90510 – Arctic Cat Prowler Frame Support Kit (1 page)
- 90250 – Kawasaki Mule 2” Receiver Hitch (1 page)
- 85640 –ATV RECEIVER HITCH (1 page)
- 85500 – John Deere Garden Tractor 2” Receiver Hitch (1 page)
- 85195 – Polaris XP (2010-2011) 2 Receiver Hitch (1 page)
- 85180 – Suzuki Swing Axle 2 Receiver Hitch (1 page)
- 85170 – Polaris X2 - 2 Receiver Hitch (1 page)
- 85160 – Kawasaki Swing Arm 2 Receiver Hitch (2 pages)
- 85155 – Honda Rancher 2 Receiver Hitch (2 pages)
- 85150 – Swing Axle Honda Hitch (1 page)
- 85145 – Honda Rancher AT 2 Receiver Hitch (2 pages)
- 93202 – ACCESSORY RACK (1 page)
- 91710 – Bucket Hugger (1 page)
- 2690 – Ranger 400cc Crossover Tool Box (2 pages)
- 98500_98510 – KXP Expansion Plungers (1 page)