INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 8)

8
SOFTWARE INSTALLATION
2 SofTWare iNSTallaTioN
Once the camera connections have been made, launch Internet Explorer
on your computer and proceed with the instructions in the following sections.
2.1 locating the iP address of the camera
The default IP address of this camera is 192.168.2.3. If you prefer to
assign a different IP address to it, log on to the Web management
interface of the camera first.
If the first three sections of the IP address of your computer aren’t
192.168.2, you’ll need to change the IP address of your computer.
1. From your desktop, go to Start, then Control Panel.