INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 36)

36
WEB MANAGEMENT INTERFACE
if it responds slowly or erratically.
LED Setting — Click “Turn off led light” if you don’t want anyone in the
view field of the camera to be able to tell that the camera is activated.
Click the button again to switch the leds back on.
3.6.4 status
This screen provides information about the camera you may need for
reference. NOTE: “Video Port” and “HTTP Port” correspond to “AV
Control Port” and “Web Port,” respectively, in 3.4.1 Network Settings/
lAN.
3.7 account
If you want to allow other people to view the live image captured by the
camera but don’t want to allow them to modify any of the system settings,
you can give them a user-level username and password (detailed below),
which allows them to only view the image without being able to change
any system settings.