INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 34)

34
WEB MANAGEMENT INTERFACE
3.6 system info
With four subsections as shown below, all operations-related settings
can be configured on this menu’s screens.
3.6.1 camera information
This screen lets you set the camera’s name and administrator’s password.
Camera Name
— Enter an easily recognizable name for each configured
camera on the network so its purpose is clear. The default name
begins with “IC-” and is followed by the last six characters of the MAC
address of the camera. When you change the name(s), make sure
you don’t assign the same name to multiple cameras.
Password — enter the password used when logging on to the Web
management interface using “admin” as the username.
Confirm Password — enter the password again.
Apply — Click to put any of the above settings/changes into effect.
3.6.2 Date/time setting
This screen gives you the option of setting the date and time of the
camera’s real-time clock manually or by using the network time protocol
(NTP).
System Info
Camera Information Date/Time Setting Utilities Status