INTELLINET NETWORK NSC18-WN User Manual User Manual
Page 37
37
WEB MANAGEMENT INTERFACE
Configure the settings for these user-level accounts on the Account screen.
Login — enter a login
username.
Password — enter a
password for this user.
Confirm password —
Re-enter the password.
Add — Click to add this
user account to the
network.
When a user is added, it will display in the table above the “Apply” button.
NOTE:
However many users are enabled, only one (including the
administrator) can view the camera image at a time.
Yes/No — Select to enable or disable this user account. If you just want
to temporarily remove the access privilege of an account, select “No”
rather than delete it, then select “Yes” to reinstate the user privileges.
Update — Click to change a username and/or password.
Delete — Click to immediately remove the account from the network.
Apply — Click to put any of the above settings/changes into effect.