INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 49)

49
SURVEILLANCE SOFTWARE
Channel — Select the channel number you want to set.
Mute Audio — Select if the designated camera does support audio but
you prefer not to hear it.
Record Video Only — Select if the designated camera does support
audio but you prefer not to record it along with any video recordings.
OK — Click to save the current settings.
Cancel — Click to cancel any changes you’ve made before saving.
4.3.1.4 motion record
When this feature is activated, only motions captured by the camera
will be recorded, which can save significant hard disk storage space.
IMPORTANT: In situations and applications that demand a high level
of security, this feature is
not recommended since some nearly
imperceptible motions may not be enough to trigger the camera’s
record function to provide information you would normally need.
Channel — Select the channel number you want to set.
Enable/Disable — Select to activate or deactivate the function.
Recording Time — Select the duration (in seconds) from the drop-down
menu the camera will record after motion has been detected.
Invoke alarm when motion is triggered — Select to have an alarm sent
whenever motion has been detected by the camera.
Send mail when motion is triggered — Select to have an e-mail sent
whenever motion has been detected (see 4.3.2.2 E-Mail Setting).
OK — Click to save the current settings.
Cancel — Click to cancel any changes you’ve made before saving.
oK Cancel