INTELLINET NETWORK NSC18-WN User Manual User Manual
Page 52
52
SURVEILLANCE SOFTWARE
E-Mail Subject — enter the subject of the e-mails being sent.
Recipient E-Mail Address(es) — This window displays a list of the e-mail
addresses established for notification.
New — Click to add an e-mail address
for notification. Enter the address in
the text field on the subsequent
screen (right), then click “OK.”
Edit — Highlight a listing in the
Recipient e-Mail Address window,
then click “edit” to make changes
Delete — Highlight a listing in the Recipient e-Mail Address window and
click “delete” to remove it.
Sender E-Mail Address — enter the e-mail address of the sender.
SMTP Server — enter the IP address or host name of the SMTP server
you want to use. NOTE: Most ISPs only allow users to use their SMTP
server: If you’re unsure which SMTP server to use, refer to your e-mail
software settings or ask your Internet service provider or network
administrator.
SMTP Port — enter the port number of the SMTP server you want to
use. By default, it’s 25 (the setting of most SMTP servers).
SMTP Auth(entication) — If your SMTP server requires authentication,
select “Enable”; if not, select “Disable.” If you’re unsure, refer to your
e-mail software settings or ask your Internet service provider or
network administrator.
SMTP Account — Enter the SMTP account (username) of your SMTP
server. In most cases, it’s the same as your POP3 username (used
to receive e-mail). If you’re unsure, refer to your e-mail software settings
or ask your Internet service provider or network administrator.
SMTP Password — enter the SMTP password of your SMTP server. In
most cases, it’s the same as your POP3 password (used to receive
e-mail). If you’re unsure, refer to your e-mail software settings or ask
your Internet service provider or network administrator.
OK — Click to save the current settings.
Cancel — Click to cancel any changes you’ve made before saving.
4.3.2.3 security
To prevent people from accessing this program, you can set a password
to protect it. You will be required, however, to enter the password every