Fluid Components International CMF Series Manual Electronics Setup and Menus - Manual (Page 14)

Commissioning
FlexCOR
™
Model CMF Series 64
Fluid Components Intl
Document 06EN003327 Rev. -
7.5.6 Service mode
All previous settings are re-initialized when service mode is exited using the top up key.
The error system
The error system is divided into an error pending list and a status log list. Time is gained as days,
min. and hours since the error has occurred.
The first 9 pending errors are stored in error pending. When an error is removed it is removed from
error pending.
The last 9 errors are stored in the error log. When an error is removed it is still kept in error log. Errors
in error log is kept in 180 days.
Error pending and error log are accessible when enabled in the operator menu.
Menu detail