English – Burkert Type 7880 User Manual
Page 39

konti-Dos - 19
english
5.3 Resetting the dosing pump's factory parameters and entering new
parameters
To rest the dosing pump's factory parameters, proceed as follows:
1. Press the Menu key once,
Press the "-" key twice, until DEFAULT displays,
Press the Menu key twice.
The error signal LED goes out and the factory parameters are reset: the re-parametering
described in points 2. and 3. below is possible.
2. Press the Menu key once,
Press the "-" key 3 times, until SETUP displays,
Press the Menu key once: LANGUAGE displays,
Press the Menu key once: ENGLISH displays,
Press the "+" until the required language displays,
Press the Menu key once to confirm the displayed language.
3. Press the Menu key once,
Press the "+" key twice: ANALOG displays,
Press the Menu key once: the display indicates the symbol of a diagram.
The pump parameters are programmed.
6 AFTER-SALES SERVICE
In the case of a problem, contact your konti-Dos system dealer.