Burkert Type 7880 - Manual (Page 28)

8 - konti-Dos
english
2.1 Description of the konti-Dos wall system
The konti-Dos wall system consists of a manual valve, a flow sensor, a control unit with pro-
gramming keys and display, a dosing pump with a purge valve, an injection system with an
anti-return valve, electrical connection cables with plugs for the control unit and the dosing
pump, and pipes for the drinking water supply and the discharge of water with the active
product added.
We recommend installing a pressure regulator (not supplied) upstream of the water supply as
the acceptable water pressure must be adapted to the installation.
All the components are fitted on a plate for fixing on the wall.
Dimensions H x W x D approx. 500 x 250 x 100 mm
Water connections G 1/2“ (all)
Dosing pump and control unit
electrical consumption
< 30 W
Manual valve to limit
the flow
Konti-Dos Type 8035
control unit with
flow sensor
Programming
Stainless steel wall fixing
plate, pre-drilled
Dosing pump
(12.0; 48.5 or 48 l/h)
Anti-return valve toward
the water network
Flow impulse connection
cable
Injection system with
anti-return valve to
the dosing pump
Connection between the
control unit and the pump
Purge valve
Drainage