Burkert Type 2300 - Manual (Page 6)

6
Basic safety instructions
CAUTION!
Risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
General hazardous situations.
To prevent injury, ensure that:
• The system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorised
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
• In the potentially explosion-risk area the angle seat control valve
Type 2300 may be used only according to the specification on the
separate Ex type label. For use observe the additional information
enclosed with the device together with safety instructions for the
explosion-risk area.
• Devices without a separate Ex type label may not be used in a
potentially explosive area.
To prevent damage to property of the device, ensure:
• Supply the media connections only with those media which are
specified as flow media in the chapter entitled “7. Technical data”.
• Do not put any loads on the valve (e.g. by placing objects on it
or standing on it).
• Do not make any external modifications to the valves. Do not paint
the body parts or screws.
The angle-seat control valve Type 2300 was developed with
due consideration given to accepted safety rules and is state-
of-the-art. However, dangers can still arise.
english
Type 2300