Burkert Type 2002 - Manual (Page 5)

5
AuthorizedUse
2. authOrizeD use
non-authorized use of the 2/2-way angle seat valve type 2000
and 3/2-way globe valve type 2002 may be a hazard to people,
nearby equipment and the environment.
• The device is designed for the controlled flow of liquid and
gaseous media.
• The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the type label are to be observed during use. The desig-
nated application cases are specified in the chapter entitled “5.
Product description”.
• The device may be used only in conjunction with third-party devices
and components recommended and authorized by Bürkert.
• Correct transportation, correct storage and installation and careful
use and maintenance are essential for reliable and problem-free
operation.
• Use the device only as intended.
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
3. Basic safety instructiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger!
danger – high pressure!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
risk of electric shock!
• Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
for model with explosion protection: danger of explosion!
• Observe the specifications on the certificate of conformity and
ATEX instructions.
english
Type 2000/2002