Disassembly, Maintenance, troubleshooting, Safety instructions – Burkert Type 2002 User Manual
Page 24
24
Disassembly
10.
DisasseMBly
Danger!
risk of injury from discharge of medium and pressure!
It is dangerous to remove a device which is under pressure due to
the sudden release of pressure or discharge of medium.
• Before removing a device, switch off the pressure and vent the
lines.
procedure:
→
Loosen pneumatic connection.
→
Remove device.
11.
Maintenance,
trOuBleshOOting
11.1. safety instructions
Danger!
risk of injury from high pressure in the equipment!
• Before dismounting pneumatic lines or valves, turn off the pres-
sure and vent the lines.
risk of injury from electric shock (only in conjunction with
corresponding actuators)!
• Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
risk of injury from improper maintenance!
• Maintenance may be carried out by authorized technicians only
and with the appropriate tools!
risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following maintenance, ensure a controlled restart.
english
Type 2000/2002