Draw-Tite 50064 CUSTOM QUICK INSTALL BRACKETS - Manual

Installation Instructions
CUSTOM QUICK INSTALL
MOUNTING KIT
Chevrolet/GMC 1500/2500/3500
Part Number
50064
© 2012 Cequent Performance Products Sheet 1 of 11 50064N 05/24/12 Rev. E
Equipment Required:
Fastener Kit: 116624
Wrenches: 3/4, 7/8, 15/16 & 1-1/8
Drill Bits: 1/8”, 1/2”, 11/16” & 3/4” Drill
Other Tools: Center Punch, Measuring Tape
WARNING: Under no circumstances do we recommend
exceeding the towing vehicle manufacturers recommended vehicle
towing capacity.
2007 (“New Body Style”) & Up – 1500
5’8”, 6’6”, & 8’ Bed Pickup Installation
1
Angle
bracket
(included)
Plug
(wire not shown for clarity)
Figure 1c
Loosen two flange bolts
Figure 1b
Outside driver side frame rail
Vehicle Forward
Spacer used to fill
gap between bracket
and frame (Not
required on older
models)
Figure 1
6
FOR USE WITH
RAIL KIT 58058
Some of the fasteners
shown are supplied
with the rail kit.
Note: For some 1500
vehicles with box frame, use
parts 8, 9 and 18 in place of
parts 1, 2, 4, and 5 on the rear
mounting holes only.
Figure 1d
Inside of frame
Outside of frame
18
9
8
13
12
13
12
14
14
14
17
17
15
16
10
7
Figure 1a
Inside driver side
frame rail
Driver side
frame rail
Plug
19
5
5
4 3
5
3
5
6
5
6
6
20
15
*
*
*
*: For Ease of Installation use Button Head bolt (20) with Flat Washer (15), As shown above.
Item # Quantity Description Item # Quantity Description
1 Qty. (4) 3/4” X 2.00” Hex Bolt 11 Qty. (2) 1/2” Bolt Leader (not shown)
2 Qty. (4) 3/4” Hex Nut 12 Qty. (8) U-Shape Block
3 Qty. (6) 3/4” Flat Washer (Large) 13 Qty. (8) 1/4” X 1.50” X 2.00” Block (Offset Hole)
4 Qty. (4) 3/4” Lock Washer 14 Qty. (12) 1/2” Lock Washer
5 Qty. (14) 1/2” Hex Nut 15 Qty. (6) 1/2” Flat Washer
6 Qty. (10) 1/2"- 13 X 2.00” Carriage Bolt 16 Qty. (4) 1/2"- 13 X 4.50” or 5.50” Carriage Bolt (as needed)
7 Qty. (2) 3/4” Pull Wire 17 Qty. (2) 1/2” Conical Toothed Washer
8 Qty. (2) 5/8”-11 X 1.75” Button Head Bolt Gr. 8 18 Qty. (4) 5/8” Conical Washer
9 Qty. (2) 5/8” Hex Nut 19 Qty. (2) 5/8” Pull Wire
10 Qty. (2) 1/2 ” Pull Wire 20 Qty. (2) 1/2" - 13 x 2.00" Button Head Bolt Gr. 8