Analog Way Orchestra2 - Manual (Page 20)

20
4.1 Operational configuration
To configure an auto launch:
1. Press the AutoLaunch tab, on the system configuration page.
2. You can Auto Login a selected user and Auto Load a selected
show.
To configure keyboard brightness and calibrate the joystick:
1. Press the Keyboard tab on the System Configuration page.
2. Rotate the corresponding knob to increase/decrease keyboard
brightness.
3. Wriggle and turn the joystick, then let it return to its initial
position. If need be, press the CALIBRATE button which will
adjust the neutral position of the joystick precisely.
4. Rotate the corresponding knob to increase/decrease Screen
Saver Delay
To set the time on the Orchestra²:
1. Press the Time tab on the System Configuration page.
2. Change the time accordingly, by pressing the +/- buttons on
the onscreen clock.
To check and update firmware version of the Orchestra²:
1. Press the Update tab on the System Configuration page.
2. You can update the software by plugging a USB key with an
up to date version of the software on the front panel of the
Orchestra². Press Refresh to list available update files on the
USB key and select the desired update from the list then press
Update. The Orchestra² will display a message while it loads
the new software.
IMPORTANT:
• Do not remove the USB key while the update process is in progress.
• Do not press yes if a popup ask you to restart when you plug a USB key.