Climax BB8000 PORTABLE LINE BORING MACHINE - Manual (Page 6)

6 11/06
Tool head assembly
(boring head shown)
Tool carrier assembly
Boring bar/leadscrew as-
sembly
Hydraulic motor
Axial feed assembly
(mechanical shown)
Rotational drive
assembly
Model BB8000 Portable Boring Machine, 8" machine shown
To accommodate a wide range of applications, the Model BB8000 Portable
Boring Machine is sold as a combination of components. Use the work sheet,
next page, as a guide. To order a complete machine, you must specify:
Axial feed assembly
Rotational drive assembly
Hydraulic motor
Bearing support assemblies - ID or end mount (at least two required)
Tool carrier assembly
Tool head assembly
Boring bar/leadscrew assembly
Tool kit (not shown)
Hydraulic power unit (not shown).
Bearing support assembly
(end mount style shown)
Bearing support assembly
(ID mount style shown)
Model BB8000 Components
11/06 11
NO. DESCRIPTION NO. DESCRIPTION
-4 Main disconnect 600V, 3-phase
for 15 hp and 25 hp (11.19 kW and
18.65 kW) electric powered hydrau-
lic power unit
Factory-installed main disconnect
mounts to electrical enclosure for
easy access. Fusible, 3-pole heavy-
duty switches are housed inside a
rainproof enclosure. To order, add “-
4” to the desired power unit number.
Example: “25343-4”.
Tool kit
Complete set of tools needed to
operate the BB8000 Portable Boring
Machine.
25515 Tool kit - 6" diameter boring bar
17298 Tool kit - 8" diameter boring bar
25807 Replacement hydraulic filter ele-
ment
14420 Hydraulic fluid - 1 gallon (3.79 L)
Special and made-to-order items
Electrical axial feed assembly
Information about the electrical axial
feed assembly is available upon
request.
Electric axial feed controls
Feed controls can be electric or
CNC and will control one or two
axes. Information about the electrical
axial feed controls is available upon
request.
Electric facing and boring head
assembly
Assembly will bore or face.
Information is available upon request.
25 hp (18.65 kW) hydraulic power
unit
Variable displacement piston pump
power unit with a multifunction
pendant to control: Emergency Stop,
Power Unit On, Power Unit Off, Jog/
Run Selector, and Slow/Fast Motor
Speed Control. Unit comes complete
with a 5 gallon (19 liter) hydraulic
reservoir, 20 foot (6 meter) x 3/4"
hydraulic hoses with quick discon-
nect fittings, and 7/8-14 SAE O-ring
fittings for the hydraulic motor.
Order
motor separately.
If using a generator, check with
your generator manufacturer to
determine required generator size.
25408 3-Phase electric powered hydraulic
power unit 230V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 60 full-load amps and
240 locked rotor amps.
25409 3-Phase electric powered hydraulic
power unit 460V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 30 full-load amps and
170 locked rotor amps.
25410 3-Phase electric powered hydraulic
power unit 550V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm
(63.2 L/min). Rated at 28 full-load
amps and 168 locked rotor amps.
25411 3-Phase electric powered hydraulic
power unit 575V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 30.4 full-load amps and
180 locked rotor amps.
25412 3-Phase electric powered hydraulic
power unit 440V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm
(63.2 L/min). Rated at 34 full-load
amps.
25413 3-Phase electric powered hydraulic
power unit 220V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm
(63.2 L/min). Rated at 68 full-load
amps.
25414 3-Phase electric powered hydraulic
power unit 380V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm
(63.2 L/min). Rated at 39.4 full-load
amps.
25415 3-Phase electric powered hydraulic
power unit 200V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm
(63.2 L/min). Rated at 74.8 full-load
amps.
Model BB8000 Components