Climax FF5000 FLANGE FACER - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPeciFicaTionS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Facing Diameter:
Min Facing Diameter 5.0 inches 127.0 mm
Max Facing Diameter 24.0 inches 609.6 mm
ID Mounting Diameter
Min I.D. Mount 3.5 inches 88.9 mm
Max I.D. Mount (optional chuck) 18.0 inches 457.2 mm
Stroke:
Radial Tool Feed Stroke 8.5 inches 215.9 mm
Vertical Tool Stroke 2.0 inches 50.8 mm
Counterbore Machining Dia. and Depth 5.0 - 24.0 inches dia. and 127.0 - 609.6 mm dia and
depth 1.97 inch in one setup depth 50.0 mm in one setup
Feed:
Power Radial & Vertical Feed Automatic, adjustable and reversible
Automatic Radial Tool Feed 0 - 0.03 inch/rev. in eight increments 0 - 0.76 mm/rev, in eight increments
Automatic Vertical Tool Feed 0 - 0.02 inch in eight increments 0 - 0.51 mm in eight increments
Swing Radius at 24 inches (609.6 mm) Min 9.5 inches, Max 15.2 inches Min 241.3 mm Max 386mm
Height Above Flange 7.6 inch 193 mm
Tool Head Adjustment +/- 60º from vertical
Torque at Cutter 150 ft-lbs 204 N•m
Motor Hp (pneumatic) 1.2 Hp 0.89 kW
Gear Reduction 28.2:1 28.2:1
Rotational Speed 0 - 40 rpm (29 rpm maximum power)
Air Requirements 90 psi 620 kPa
30 ft3 per min. (max power) 0.85 m3 per min (max power)
Approx. Operational Wt 60 lbs 27 kg
Approx. Shipping Wt 175 lbs 80 kg
Approx. Shipping Dimensions 25 x 25 x 18 inches 635 x 635 x 457 mm
(1 container)