Climax VM1600 GATE VALVE GRINDING & LAPPING - Manual (Page 9)

Feb-10 / VM1350-1600 Gate Valve Grinding & Lapping Machine Brochure.doc Page 9 of 10
Accessories
P/N Description
Grinding adapter
For using the tooling of the VM1000 series on stationary drill
presses. The grinding pressure is made by an application of
springs.
The scale for the grinding pressure is divided into two
ranges: One for high rate of removal of material and the
other for high precision surfaces.
185-00S-S22 Grinding adapter MT2
For using on stationary drill presses with morse taper #2.
185-00S-S23 Grinding adapter MT3
For using on stationary drill presses with morse taper #3.
110-33S-N01 CBN grinding disks 2” (50 mm) diameter. (each)
(A total of 5 required)
Required for rough grinding of heavily damaged seats
(1 set is included in each component package).
110-34S-N01 CBN grinding disks 3.2” (80 mm) diameter. (each)
(A total of 5 required)
Required for rough grinding of heavily damaged seats.
110-41S-N01
Lapping disks 1.2” (30 mm) diameter (each)
(A total of 5 required)
110-42S-N01
Lapping disks 2” (50 mm) diameter (each)
(A total of 5 required)
110-43S-N01 Lapping disks 3.2” (80 mm) diameter (each)
(A total of 5 required)