Climax LM5200 LINEAR/GANTRY MILL - Manual (Page 3)

Tool ConfiguraTions
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
1
3
Reattach RAM to saddle and rails for a complete Gantry
Mill.
4
Split the bed & saddle pictured above into two separate
rails for Gantry Milling as pictured below.
Linear Mill set up for overhead milling.
Easy Conversion from Linear to Gantry Milling
The Climax LM5200 and LM6200 Milling Machines can be easily reconfigured to perform Linear or Gantry Milling. Below is a step by
step overview of the conversion steps from traditional linear milling to gantry milling.
2
Separate main bed and RAM.