Climax KM3000 KEY MILL - Manual (Page 6)

APPLICATION PHOTOS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 6
As versatile as your imagination
Here are some examples:
1. Attach angles to the sides of the base, and
clamp the KM3000 down to cut motor mount
slots or bore holes.
2. Clamp on shafts up to 10.5 inches (266 mm)
dia. with optional chain clamp.
3. Mounted in a vice, the KM3000 can cut
keyways in small shafts and mill other small
parts such as gear pullers.
4. Special fixtures allow the KM3000 to cut ID
keyways and slots in large tubing, etc.
5. Use the KM3000 in tight places, like the shaft
on a paving machine.
6. Cut flats on drill pipe section with the optional
cross milling adapter and stamp ID marks if
you wish.
7. Mounted vertically on a stationary milling
machine, the KM3000 can cut a mounting
pad for a readout instrument.
1
2
4
5
6
7
3
Portable Machine Tools, Inc. ©
Newberg, OR USA 97132
WWW.CPMT.COM inside U.S. 1-800-333-8311
KM3000
Vertical adjusting screw
Zeroing type dial
1 Hp (0.75 kW) universal type
electric motor
Bar clamp
Self-aligning
V-base
Spindle
( 5 /
8
inch or
16 mm options
available )
In-line switch (speed con-
trol available)
The KM3000 is widely used by
these industries:
• Construction
• Mining
• Power Generation
• Ship building
• Pulp and paper
• Steel and aluminum
Typical applications:
• Key slots on crank shafts
• Keyways on tapered shafts
• Keyways on pump shafts
• Motor and pump repair
• Mill radius slots in turbine shafts
• Cutting new keyways on paper rolls
• Chipper and conveyor repair
• Keyways on motors