Climax KM3000 KEY MILL - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPECIFICATIONS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Machining Ability Example
Material C1018 steel C1018 steel
Metal removal rate 1 inch 3 /minute 16.4 cm 3 /min
Keyway dimensions 1 x 0.5 x 6 inches 25.4 mm x 12.7 mm x 152.4 mm
Cutting Time 3 minutes and 10 seconds 3 minutes and 10 seconds
Machine Performance Ranges
Stroke (slide travel) max. 6.0 inches 152.4 mm
Vertical travel max. 1.75 inches 44.5 mm
No load variable spindle speed
minimum 365 rpm 365 rpm
maximum 675 rpm 675 rpm
Spindle hole diameter INCH 0.625 inches
METRIC 16.0 mm
Maximum end mill diameter 1.25 inches 31.75 mm
Maximum shaft diameter:
standard bar clamp 4.5 inches 114.3 mm
with optional chain clamp 10.5 inches 266.7 mm
Minimum shaft diameter:
standard bar clamp 1.5 inches 38.1 mm
with optional shim kit 0.75 inches 19.1 mm
Minimum clamping space required
on stub shaft 1.5 inches 38.1 mm
Power Options
Power, electric
120V or 230V, 50-60Hz 1.25 kW 1.25 kW
Power, pneumatic 1.2 Hp 0.9 kW
Power, hydraulic 4.7 Hp 3.5 kW
Measures
Overall length 12.5 inches 317.5 mm
Overall width 6.6 inches 167.6 mm
Overall height 11.63 inches 295.4 mm
Base size 4.38 x 6.75 inches 111.3 x 175.1 mm
Operating weight (with speed control) 70 lbs. 31.8 kg
Shipping weight (with speed control) 82 lbs. 37.2 kg
Shipping dimensions 13 x 14 x 20 inches 330 x 360 x 508 mm