Climax KM4000 KEY MILL - Manual (Page 5)

Tool ConfiguraTions
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 5
No. Description
59246 pneumatic conditioning unit
Required to protect air motor warranty. Includes:
lubricator, filter, stand, and air line. Sold only as a unit.
Approx. net weight 11 lbs (5 kg).
10493 chain clamp assembly
20 inch (508 mm)chains for use in addition to standard chain clamp assembly.
Used to attach key mill to shafts 18 - 24 inches (457.2 - 609.6 mm) in diameter.
Approx. net weight 8.6 lbs (3.9 kg).
11851 Shim kit
Shims fit inside base to enable the key mill to be mounted on shafts as small
as 4.0 inches (101.6 mm) in diameter.
Approx. net weight: 3.4 lbs (1.6 kg).
13737 tool kit
Hand crank and hex wrenches necessary to operate the key mill.
Approx. net weight 0.5 lbs (0.3 kg)
36549 Speed control assembly 120V
Provides on/off and variable speed of the motor. Fits current generation of KM
motors only, not older models. Standard NEMA 5-15 straight blade plug with
ground.
36685
Speed control assembly 230V, ce-compliant
Provides on/off and variable speed of the motor. Fits current generation of KM
motors only, not older models. European Schuko style plug.
36950 Speed control assembly and retrofit Kit
Provides on/off and variable speed of the motor. Includes Part Number 36549
Speed Control Assembly with the new end cap assembly (Part Number 34142)
for the motor to retrofit older machines to the current controller. Standard
NEMA 5-15 straight blade plug with ground.
Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
59246
PNEUMATIC CONDITIONING UNIT 1/2 IN W/ L.P. DROP OUT
AND E-STOP
NOTE: Drawings are for reference only, are not to
scale, and may not represent actual product.