Climax KM4000 KEY MILL - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SpecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Overall length 18.5 inches 469.9 mm
Overall width 14.0 inches 355.6 mm
Overall height 13.25 inches 336.6 mm
Base size 9.0 x 18.5 inches 228.6 x 469.9 mm
Slide travel, longitudinal 7.88 inches 200.2 mm
Slide travel, transversal 2.0 inches 50.8 mm
Vertical travel max 3.0 inches 76.2 mm
Power, electric: 120V or 230V, 50-60Hz 1.0 Hp 0.75 kW
Power, pneumatic 1.2 Hp 0.9 kW
Power, hydraulic 4.0 Hp 2.98 kW
No load variable spindle speed
minimum 350 rpm 350 rpm
maximum 675 rpm 675 rpm
Spindle hole diameter INCH 0.75 inches 19.1 mm
METRIC 0.79 inches 20 mm
Maximum end mill diameter 1.25 inches 31.75 mm
Maximum shaft diameter:
standard bar clamp 18.0 inches 457.2 mm
with optional chain clamp 24.0 inches 609.6 mm
Minimum shaft diameter:
standard bar clamp 8.0 inches 203.2 mm
with optional shim kit 4.0 inches 101.6 mm
Minimum clamping space required
on stub shaft 8.0 inches 203.2 mm
obstructed shaft 10.5 inches 266.7 mm
( NOTE : The KM4000 can cut keyways within
2.2 inches (55.88 mm) of the obstruction)
One end mill included Ø 0.75 inches Ø 19.1 mm
Operating weight 195 lbs. 89 kg
Shipping weight (with speed control) 250 lbs. 114 kg
Shipping dimensions 24 x 24 x 19 inches 610 x 610 x 483 mm
Machining Ability Example
Material C1018 steel C1018 steel
Metal removal rate 1 inch 3 /minute 16.4 cm 3 /min
Keyway dimensions 1.0 x 0.5 x 8.0 inches 25.4 mm x 12.7 mm x 203.2 mm
Cutting Time 3 minutes and 10 seconds 3 minutes and 10 seconds