How easy is resi-gard to handle on the job, How easy is resi-gard to install, How is resi-gard packaged – Carlon Structured Cable Management Systems Handbook - Low Res User Manual
Page 6

4
• PVC conduit is superior to metallic conduit in
most applications.
• Since both metallic and nonmetallic raceways
are recognized by NEC, the buyer can decide
which product is best suited to the installation
requirement.
• A real concern for life safety in fires must be
directed toward eliminating fire ignition, providing
better control of burnables in the room and
providing state-of-the-art fire protection and
sprinkler systems. These are the goals of many
recognized fire authorities.
7. HOW EASY IS RESI-GARD TO HANDLE ON
THE JOB?
Let’s take a look:
3
/
4
" Resi-Gard weighs 11.5 pounds per 100 feet
1" Resi-Gard weighs 17.9 pounds per 100 feet
1
1
/
4
" Resi-Gard weighs 21.5 pounds per 100 feet
1
1
/
2
" Resi-Gard weighs 11.2 pounds per 50 feet
2" Resi-Gard weighs 13.4 pounds per 50 feet
8. HOW EASY IS RESI-GARD TO INSTALL?
Very easy! All that is needed for installation is a
Carlon conduit cutter, an electrician’s knife or utility
knife, conduit clamps (or tie wraps or tie wire), and a
pair of side cutter pliers. That’s all!
9. HOW IS RESI-GARD PACKAGED?
Resi-Gard is packaged in coils and reels:
3
/
4
" Resi-Gard – 100' per coil
1000' per reel (made to order)
1" Resi-Gard – 100' per coil
1500' per reel (made to order)
1
1
/
4
" Resi-Gard – 100' per coil
1
1
/
2
" Resi-Gard – 50' per coil
2" Resi-Gard – 50' per coil
500' per reel (made to order)
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]