Carlon Structured Cable Management Systems Handbook - Low Res - Manual (Page 21)

19
Section 6.
Dual Voltage Box/Bracket
If you have a typical dual voltage application, then
Carlon’s New Dual Voltage Box/Bracket will solve your
needs.
Because high voltage wires will be installed in one side,
Carlon kept the box our trademarked color, Carlon
® Blue ™ .
The high voltage side of the box has a capacity of 20.5 in
3
to accommodate your deepest wiring requirements.
The low voltage bracket will be marked with a warning
stating it is approved for low voltage devices only.
This box/bracket is listed for use per the 2002 National
Electrical Code, Section 800.52 (A)(1)(c) Exception No. 1
for dual voltage applications because it has a built-in
divider. It is designed to accept a standard NEMA
2-gang wall plate.
Other features include the Resi-Ring for a 3 /
4
" Resi-Gard
flexible raceway connection or it can be used to tie off
your cables. And the open back on the low voltage
bracket allows a generous bend radius for your sensitive
structured cables.
2-Gang Dual Voltage Box/Bracket
SC200DV
E42728
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]