Carlon Round Nonmetallic Floor Box - Manual

25701 Science Park Drive,
Cleveland, Ohio 44122 USA
CALL TOLL-FREE OR FAX
Tel: (800) 3-CARLON (1-800-322-7566)
In Ohio: (216) 464-3400
FAX: (216) 766-6444
TDD/Hearing Impaired Access:
(216) 831-5918
www.carlon.com
In Canada, contact:
P.O. Box 60
35 Killaloe Road
Unit 4 Concord, Ontario
Canada L4K 1A0
(905) 660-7993
(888) 269-9902
Fax: (905) 660-9663
(888) 229-8622
Carlon ®
Round
Non-Metallic
Floor Box
Installation
Instructions
IS6
1. Set floor box on level surface. 2. Make connections into outlets
by solvent cementing conduit
into proper outlet in box.
3. Slip on throwaway plastic cap
and seal unused outlets with
solvent cemented plugs.
1. INSTALLATION IS EASY
3 Simple Steps
to Install Non-Metallic Floor Box in Cement
1. Remove plastic cap and determine
thickness of flooring to be used.
Scribe a line around floor box at
this distance from floor.
2. Using handsaw, cut off floor box
at scribed line.
2. TRIM OUT IS A SNAP
1. Install mounting ring to underside of cover.
NOTE: Box may extend any distance above flooring. Box is cut off to exact height with a handsaw.
Mounting ring assures a LEVEL top, every time.
3. INSTALL COVER
Refer to installation instructions provided with cover.
Nonmetallic cover mounting
ring (Leveling Ring)
Metal cover adapter mounting ring
E42728
3. Press mounting ring
cover assembly into
floor box.
2. Carefully apply Carlon
PVC Cement to
mounting ring only.
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]