Atec Rohde-Schwarz-SMU200A - Manual (Page 8)

Version 08.00, January 2012
8 Rohde & Schwarz R&S ® SMU200A Vector Signal Generator
RF characteristics
Frequency
underrange 100 kHz to < 300 kHz
R&S ® SMU-B102, R&S ® SMU-B202 up to 2.2 GHz
R&S ® SMU-B103, R&S ® SMU-B203 up to 3 GHz
R&S ® SMU-B104 up to 4 GHz
Frequency range
R&S ® SMU-B106 up to 6 GHz
Resolution of setting 0.01 Hz
standard, fundamental frequency range =
750 MHz to 1500 MHz 5 µHz Resolution of synthesis
with R&S ® SMU-B22 option 0.2 µHz
to within < 1 × 10
−7
for f > 200 MHz or
< 124 Hz for f < 200 MHz,
with GUI update stopped,
after IEC/IEEE bus delimiter
< 2 ms, 1.5 ms (typ.)
ALC state: off (sample & hold) < 4 ms, 2.5 ms (typ.)
Setting time 1
after trigger pulse in list mode < 450 µs, 300 µs (typ.)
Phase offset adjustable in 0.1° steps
Frequency sweep
Operating modes digital sweep in discrete steps automatic, step, single,
external single, external step,
manual or external trigger,
linear or logarithmic spacing
Sweep range full frequency range
linear full frequency range Step width
logarithmic 0.01 % to 100 % per step
range 10 ms to 10 s Dwell time
resolution 0.1 ms
Reference frequency
after 30 days of uninterrupted operation < 1 × 10
−9
/day, < 1 × 10
−7
/year Aging
with R&S ® SMU-B22 option < 5 × 10
−10
/day, < 3 × 10
−8
/year
in operating temperature range ±6 × 10
−8
Maximum temperature effect
with R&S ® SMU-B22 option ±6 × 10 –9
Warm-up time to nominal thermostat temperature ≤ 10 min
frequency (approx. sine wave) 10 MHz or external input frequency
level 5 dBm (typ.)
Output for internal reference signal
source impedance 50 Ω
frequency 5 MHz, 10 MHz or 13 MHz
maximum deviation 3 × 10
−6
input level, limits ≥ −6 dBm, ≤ 19 dBm
recommended 0 dBm to 19 dBm
Input for external reference
input impedance 50 Ω
sensitivity 1 × 10
−8
/V to 3 × 10
−8
/V (typ.)
with R&S ® SMU-B22 option 4 × 10 –9 /V to 1.2 × 10
−8
/V (typ.)
input voltage –10 V to +10 V
Electronic tuning from input
AUX I/O
input impedance 10 k Ω
1 Installation of software that is not authorized by Rohde & Schwarz for use on the R&S ® SMU200A or installation of antivirus software can deteriorate
the setting time performance.