Atec Rohde-Schwarz-SMU200A - Manual (Page 35)

Version 08.00, January 2012
Rohde & Schwarz R&S ® SMU200A Vector Signal Generator 35
Digital standards with R&S
®
WinIQSIM2™
(for the R&S
®
SMU-B9/-B10/-B11 ARB)
At least one I/Q baseband generator (R&S ® SMU-B9/-B10/-B11 options) must be installed. If two I/Q baseband generators are installed
and two waveforms of the same standard (e.g. GSM/EDGE) are to be output simultaneously, two corresponding software options must
also be installed (in this case R&S
® SMU-K240). If only one R&S ® SMU-K240 is installed and GSM/EDGE waveforms are played in one
I/Q baseband generator, the other I/Q baseband generator is disabled for GSM/EDGE waveforms. However, a software option is not
tied to a specific I/Q baseband generator.
R&S ® WinIQSIM2™ requires an external PC.
GSM/EDGE R&S ® SMU-K240 option
EDGE Evolution R&S ® SMU-K241 option
3GPP FDD R&S ® SMU-K242 option
3GPP FDD enhanced BS/MS tests including HSDPA R&S ® SMU-K243 option
GPS R&S ® SMU-K244 option
3GPP FDD HSUPA R&S ® SMU-K245 option
CDMA2000 ® R&S ® SMU-K246 option
1xEV-DO R&S ® SMU-K247 option
IEEE 802.11a/b/g R&S ® SMU-K248 option
IEEE 802.16 WiMAX™ R&S ® SMU-K249 option
TD-SCDMA (3GPP TDD LCR) R&S ® SMU-K250 option
TD-SCDMA (3GPP TDD LCR) enhanced BS/MS tests including HSDPA R&S ® SMU-K251 option
DVB-H/DVB-T R&S ® SMU-K252 option
DAB/T-DMB R&S ® SMU-K253 option
IEEE 802.11n R&S ® SMU-K254 option
EUTRA/LTE R&S ® SMU-K255 option
HSPA+ R&S ® SMU-K259 option
Bluetooth ® EDR R&S ® SMU-K260 option
Multicarrier CW signal generation R&S ® SMU-K261 option
Additive white Gaussian noise (AWGN) R&S ® SMU-K262 option
TETRA Release 2 R&S ® SMU-K268 option
EUTRA/LTE Release 9 and enhanced features R&S ® SMU-K284 option
EUTRA/LTE Release 10 (LTE-Advanced) R&S ® SMU-K285 option
IEEE 802.11ac R&S ® SMU-K286 option
The options are described in the R&S ® WinIQSIM2™ data sheet (PD 5213.7460.22).