Atec Rohde-Schwarz-SMU200A - Manual (Page 30)

Version 08.00, January 2012
30 Rohde & Schwarz R&S ® SMU200A Vector Signal Generator
Modulation uncertainty for main standards
Typical values
Standard GSM EDGE WCDMA
3GPP
(1DPCH) cdmaOne
Reverse DECT TETRA NADC PDC IEEE
802.11a
800 to 900 824 to 894 810 to 956 2400 to
2485 Frequency
in MHz 400 to
2000 400 to
2000 1800 to
2200
1850 to 2000
1880 to
1990 380 to
480
1850 to
2000 1429 to
1501 5150 to
5825
EVM in % – 0.2 0.3 0.2 – 0.2 0.2 0.2 0.4
Phase error
in ° 0.15 – – – – – – – –
Deviation error
in kHz – – – – 0.5 – – – –
Channel
spacing 200 kHz 200 kHz 5 MHz 1.25 MHz 1.728 MHz 25 kHz 30 kHz 25 kHz –
Adjacent channel power ratio (ACPR) in dB 8
In adjacent
channel −37 −38 −72 9 −85 10 – −74 11 −34 −74 −42
at 11 MHz
In alternate
channel −71 −71 −78 12 −89 13 – −77 11 −80 −82 −64
at 20 MHz
In 2nd alternate
channel −85 −85 – −95 14 – – – – −66
at 30 MHz
Signal performance for digital standards
GSM/EDGE with R&S ® SMU-K40 option
Burst on/off ratio > 100 dB
MSK, Gaussian filter B × T = 0.3
RMS < 0.4°, 0.15° (typ.)
Phase error
peak < 1.2°, 0.4° (typ.)
Error vector magnitude 8PSK EDGE, Gaussian linearized filter,
RMS < 0.5 %, 0.2 % (typ.)
values measured with 30 kHz resolution bandwidth, referenced to level in band center
without power ramping
level
≤ 10.5 dBm, ≤ 16.5 dBm with R&S ® SMU-B31, R&S ® SMU-B36 options
200 kHz offset < –34 dB, –37 dB (typ.)
400 kHz offset < –68 dB, –71 dB (typ.)
Power density spectrum
600 kHz offset < –80 dB, –85 dB (typ.)
8 Level restricted, see specifications.
9 0 dB baseband gain (standard).
10 885 kHz offset and 30 kHz bandwidth.
11 Measured with root cosine filter.
12 6 dB baseband gain (low noise).
13 1.25 MHz offset and 30 kHz bandwidth.
14 1.98 MHz offset and 30 kHz bandwidth.