Atec Rohde-Schwarz-SMU200A - Manual (Page 3)

Version 08.00, January 2012
Rohde & Schwarz R&S ® SMU200A Vector Signal Generator 3
Digital standards with R&S
®
WinIQSIM2™ (for the R&S
®
SMU-B9/-B10/-B11 ARB).................................................. 35
Fading and noise........................................................................................................................................................... 36
Fading simulator (R&S ® SMU-B14 option) and fading simulator extension (R&S ® SMU-B15 option)....................................................36
Dynamic fading and enhanced resolution (R&S ® SMU-K71 option) ......................................................................................................37
Extended statistic functions (R&S ® SMU-K72 option)............................................................................................................................38
MIMO fading (R&S ® SMU-K74 option)...................................................................................................................................................38
Dynamic scenario simulation (R&S ® SMU-K77 option) .........................................................................................................................41
Additive white Gaussian noise (AWGN, R&S ® SMU-K62 option) ..........................................................................................................41
Other options ................................................................................................................................................................ 42
BER measurement (R&S ® SMU-K80 option).........................................................................................................................................42
BLER measurement (R&S ® SMU-K80 option).......................................................................................................................................42
General data .................................................................................................................................................................. 43
Remote control......................................................................................................................................................................................43
Operating data ......................................................................................................................................................................................43
License information...............................................................................................................................................................................43
Ordering information .................................................................................................................................................... 44
Specifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental
conditions met, calibration cycle adhered to, and all internal adjustments performed. Data designated “overrange” or “underrange” and
data without tolerance limits is not binding.
EMC specifications are tested with sufficiently shielded cables and accessories (e.g. mouse and keypad). To prevent degradation of
these specifications, it is the user's responsibility to use appropriate equipment.
In compliance with the 3GPP standard, chip rates are specified in Mcps (million chips per second), whereas bit rates and symbol rates
are specified in kbps (thousand bits per second) or ksps (thousand symbols per second). Mcps, kbps and ksps are not SI units.
Device settings and GUI parameters are designated with the format "parameter: value".
This document contains the specifications of the R&S ® SMU200A, including RF characteristics, analog modulation, I/Q modulation,
performance of the I/Q baseband generator, fading and noise. The functional specifications of the digital standards (R&S ® SMU-K40 to
-K61 options) and the digital standards with external PC software (R&S ® SMU-K6) are described in the Digital Standards data sheet
(PD 5213.9434.22). The digital standards with R&S ® WinIQSIM2™ are described in the R&S ® WinIQSIM2™ data sheet
(PD 5213.7460.22).