Atec Rohde-Schwarz-SMU200A - Manual (Page 6)

Version 08.00, January 2012
6 Rohde & Schwarz R&S ® SMU200A Vector Signal Generator
Frequency and enhancement options
Frequency options
One of the following frequency options must be installed in RF path A:
R&S ® SMU-B102 100 kHz to 2.2 GHz
R&S ® SMU-B103 100 kHz to 3 GHz
R&S ® SMU-B104 100 kHz to 4 GHz
R&S ® SMU-B106 100 kHz to 6 GHz
One of the following frequency options can be installed in RF path B:
(If R&S ® SMU-B104 or R&S ® SMU-B106 and one of the R&S ® SMU-B20 or R&S ® SMU-B22 options are installed in RF path A,
no options can be installed in RF path B.)
R&S ® SMU-B202 100 kHz to 2.2 GHz
R&S ® SMU-B203 100 kHz to 3 GHz
Enhancement options
Enhanced phase noise performance and FM/ φM modulator
One of the following options can be installed in RF path A:
R&S ® SMU-B20 FM/ φM modulator
R&S ® SMU-B22 FM/ φM modulator and enhanced phase noise performance
These options cannot be installed in RF path B.
High-power output
The following options can be installed
R&S ® SMU-B31 High-power output (RF path A)
R&S ® SMU-B36 High-power output (RF path B)
Phase coherence
R&S ® SMU-B90 Phase coherence
This option can be installed once. It provides phase-coherent RF outputs of two or more RF paths for one or more instruments.