Atec Rohde-Schwarz-SMU200A - Manual (Page 37)

Version 08.00, January 2012
Rohde & Schwarz R&S ® SMU200A Vector Signal Generator 37
Number of fading paths, RF bandwidth and timing resolution
With R&S ® SMU-K71 only
With R&S ® SMU-B14
Signal paths Fading paths RF bandwidth Timing resolution
1 20 80 MHz 10 ns
1 12 30 MHz 0.01 ns
1 8 50 MHz 0.01 ns
With R&S ® SMU-B14 and R&S ® SMU-B15
Signal paths Fading paths RF bandwidth Timing resolution
1 40 80 MHz 10 ns
1 24 30 MHz 0.01 ns
1 16 50 MHz 0.01 ns
2 20 80 MHz 10 ns
2 12 30 MHz 0.01 ns
2 8 50 MHz 0.01 ns
Dynamic fading and enhanced resolution (R&S
®
SMU-K71 option)
At least one R&S ® SMU-B14 fading simulator must be installed. If both the R&S ® SMU-B14 and the R&S ® SMU-B15 are installed (signal
paths A and B), dynamic fading and enhanced resolution can be used either on signal path A or B with one R&S ® SMU-K71 option. For
dynamic fading and enhanced resolution to be used on signal paths A and B simultaneously, two R&S ® SMU-K71 must be installed.
Moving delay mode
System bandwidth
50 MHz
Number of fading paths 2 per signal path
Fading profiles none
Basic delay in steps of 10 ns 0 ms to 2.56 ms
Delay variation peak to peak 0.3 µs to 40 µs
Variation period peak to peak 10 s to 500 s
Variation speed peak to peak 0 µs/s to 500 µs/s
Delay step size < 10 ps
Birth-death mode
System bandwidth
50 MHz
Number of fading paths 2 per signal path
Fading profiles pure Doppler
Delay range 0 µs to 40 µs
Delay grid 0 µs to 20 µs 16
Positions 3 to 50 16
Hopping dwell 100 ms to 5 s
Start offset separately settable for each signal path 1 ms to 200 ms
Delay resolution 10 ns
16 The maximum delay range of 40 µs cannot be exceeded.