Atec Agilent-N9010A User Manual
Page 8
8
Input attenuation switching uncertainty
Specifications
Additional information
Attenuation > 2 dB, preamp off
50 MHz (reference frequency)
± 0.20 dB
± 0.08 dB typical
Relative to 10 dB (reference
setting)
9 kHz to 3.6 GHz
± 0.3 dB nominal
3.5 to 7.0 GHz
± 0.5 dB nominal
6.9 to 13.6 GHz
± 0.7 dB nominal
13.5 to 26.5 GHz
± 0.7 dB nominal
> 26.5 GHz
± 1.0 dB nominal
Total absolute amplitude accuracy
(10 dB attenuation, 20 to 30 °C, 1 Hz ≤ RBW ≤ 1 MHz, input signal –10 to –50 dBm, all settings auto-coupled except Auto Swp
Time = Accy, any reference level, any scale, σ = nominal standard deviation)
At 50 MHz
At all frequencies
9 kHz to 3.6 GHz
± 0.40 dB
± (0.40 dB + frequency response)
± 0.27 dB (95th percentile ≈ 2σ)
Preamp on
100 kHz to 3.6 GHz
± (0.39 dB + frequency response)
Input voltage standing wave ratio (VSWR) (≥ 10 dB input attenuation)
Options 503,
507, 513, 526
Options 532, 544
10 MHz to 3.6 GHz
< 1.2:1 nominal
1.2:1 nominal
3.6 to 26.5 GHz
< 1.8:1 nominal
1.5:1 nominal
26.5 to 44 GHz
N/A
< 1.8:1 nominal
Resolution bandwidth switching uncertainty (referenced to 30 kHz RBW)
1 Hz to 3 MHz RBW
± 0.10 dB
4, 5, 6, 8 MHz RBW
± 1.0 dB
Reference level
Range
Log scale
–170 to +23 dBm in 0.01 dB steps
Linear scale
Same as Log (707 pV to 3.16 V)
Accuracy
0 dB
Display scale switching uncertainty
Switching between linear and log
0 dB
Log scale/div switching
0 dB
Display scale fidelity
Between –10 dBm and –80 dBm
input mixer level
± 0.15 dB total
Trace detectors
Normal, peak, sample, negative peak, log power average, RMS average, and voltage average
Preamplifier (Option P03, P07, P13, P26, P32, P44)
Frequency range
Option P03
100 kHz to 3.6 GHz
Option P07
100 kHz to 7 GHz
Option P13
100 kHz to 13.6 GHz
Option P26
100 kHz to 26.5 GHz
Option P32
100 kHz to 32 GHz
Option P44
100 kHz to 44 GHz
Gain
100 kHz to 3.6 GHz
+20 dB nominal
3.6 to 7.0 GHz
+35 dB nominal
> 7 GHz
+40 dB nominal
Noise figure
100 kHz to 3.6 GHz
8 to 12 dB nominal (proportional to frequency)
3.6 to 8.4 GHz
9 dB nominal
8.4 to 13.6 GHz
10 dB nominal
> 13.6 GHz
DANL + 176.24 dB nominal