Atec Agilent-N9010A - Manual (Page 14)

14
Figure 4. Nominal phase noise at different center frequencies for millimeter-wave EXA (Option 532 or 544)
Phase noise 1 Offset Specification Typical
Millimeter-wave 100 Hz –84 dBc/Hz –88 dBc/Hz
(Option 532, 544) 1 kHz – –101 dBc/Hz nominal
Noise sidebands 10 kHz –103 dBc/Hz –106 dBc/Hz
(20 to 30 °C, CF = 1 GHz) 100 kHz –115 dBc/Hz –116 dBc/Hz
1 MHz –135 dBc/Hz –137 dBc/Hz
10 MHz – –149 dBc/Hz nominal
1. For nominal phase noise values with the millimeter-wave EXA (Option 532 or 544), refer to Figure 4.
Nominal phase noise at different center frequencies
with RBW selectivity curves, optimized phase noise versus offset frequency
SSB phase noise (dBc/Hz)
Freq (kHz)
Option MPB, microwave preselector bypass 1
Frequency range
N9010A-507
3.6 to 7 GHz
N9010A-513 3.6 to 13.6 GHz
N9010A-526 3.6 to 26.5 GHz
N9010A-532 3.6 to 32 GHz
N9010A-544 3.6 to 44 GHz
1. When Option MPB is installed and enabled, some aspects of the analyzer performance changes. Please refer to the EXA specification guide for more
details.