Atec Agilent-N9010A - Manual (Page 17)

17
Inputs and Outputs
Front panel
RF input connector
Standard (Option 503, 507, 513, or 526)
Standard (Option 532 or 544)
Type-N female, 50 Ω nominal
2.4 mm male, 50 Ω nominal
Probe power
Voltage/current +15 Vdc, ± 7 % at 150 mA max nominal
–12.6 Vdc, ± 10 % at 150 mA max nominal
USB 2.0 ports
Master (2 ports)
Standard
Connector
Output current
Compatible with USB 2.0
USB Type-A female
0.5 A nominal
External mixing, Option EXM (available only with EXA millimeter wave, Option 532 or 544)
Connection port
Connector
Impedance
Functions
SMA, female
50 Ω nominal
Triplexed for mixer bias, IF input and LO output
Mixer bias range ± 10 mA in 10 μA step
IF input center frequency
Narrowband IF path
40 MHz IF path
322.5 MHz
250 MHz
LO output frequency range 3.75 to 14.0 GHz
Rear panel
10 MHz out
Connector
Output amplitude
Frequency
BNC female, 50 Ω nominal
≥ 0 dBm nominal
10 MHz ± (10 MHz x frequency reference accuracy)
Ext Ref In
Connector
Input amplitude range
Input frequency
Frequency lock range
BNC female, 50 Ω nominal
–5 to 10 dBm nominal
10 MHz nominal
± 5 x 10 –6 of specified external reference input frequency
Trigger 1 and 2 inputs
Connector
Impedance
Trigger level range
BNC female
> 10 kΩ nominal
–5 to 5 V
Trigger 1 and 2 outputs
Connector
Impedance
Level
BNC female
50 Ω nominal
5 V TTL nominal
Monitor output
Connector
Format
Resolution
VGA compatible, 15-pin mini D-SUB
XGA (60 Hz vertical sync rates, non-interlaced) analog RGB
1024 x 768