Atec Agilent-N9010A - Manual (Page 11)

11
Second harmonic distortion (SHI)
Source frequency SHI (nominal)
RF/MW
(Option 503, 507, 513, 526)
10 MHz to 1.8 GHz +45 dBm
1.75 to 7.0 GHz +65 dBm
7.0 to 11.0 GHz +55 dBm
11.0 to 13.25 GHz +50 dBm
Millimeter-wave
(Option 532, 544)
10 MHz to 1.8 GHz +45 dBm
1.8 to 6.5 GHz +65 dBm
6.5 to 10 GHz +60 dBm
10 to 13.25 GHz +55 dBm
13.25 to 22 GHz +50 dBm
Third-order intermodulation distortion (TOI)
(Two –30 dBm tones at input mixer with tone separation > 5 times IF prefilter bandwidth, 20 to 30 °C, see Specifications Guide
for IF prefilter bandwidths)
TOI TOI (typical)
RF/MW
(Option 503, 507, 513, 526)
100 to 400 MHz +13 dBm +17 dBm
400 MHz to 3.6 GHz +14 dBm +18 dBm
3.6 to 13.6 GHz +14 dBm +18 dBm
13.6 to 26.5 GHz +12 dBm +16 dBm
Preamp on, RF/MW
(Option 503, 507, 513, 526)
30 MHz to 3.6 GHz (two –45 dBm tones at preamp)
3.6 to 26.5 GHz (two –50 dBm tones at preamp)
0 dBm nominal
–18 dBm nominal
Millimeter-wave
(Option 532, 544)
10 to 100 MHz +12 dBm +17 dBm
100 MHz to 3.95 GHz +15 dBm +19 dBm
3.95 to 8.4 GHz +15 dBm +18 dBm
8.3 to 13.6 GHz +15 dBm +18 dBm
13.5 to 17.1 GHz +11 dBm +17 dBm
17.0 to 26.5 GHz +10 dBm +17 dBm (nominal)
26.5 to 44 GHz – +13 dBm (nominal)
Preamp on, millimeter-wave
(Option 532, 544)
30 MHz to 3.6 GHz (two –45 dBm tones at preamp) 0 dBm (nominal)
3.6 to 26.5 GHz (two –50 dBm tones at preamp) –18 dBm (nominal)
1. N is the LO multiplication factor.