Atec Agilent-N9010A - Manual (Page 19)

19
I/Q Analyzer
Frequency
Frequency span
Standard 10 Hz to 10 MHz
Option B25 (standard) 10 Hz to 25 MHz
Option B40 10 Hz to 40 MHz
Resolution bandwidth (spectrum measurement)
Range
Overall 100 mHz to 3 MHz
Span = 1 MHz 50 Hz to 1 MHz
Span = 10 kHz 1 Hz to 10 kHz
Span = 100 Hz 100 mHz to 100 Hz
Window shapes
Flat top, Uniform, Hanning, Gaussian, Blackman, Blackman-Harris, Kaiser Bessel (K-B 70 dB, K-B 90 dB and K-B 110 dB)
Analysis bandwidth
Standard 10 Hz to 10 MHz
Option B25 (standard) 10 Hz to 25 MHz
Option B40 10 Hz to 40 MHz
IF frequency response (standard 10 MHz IF path)
IF frequency response (demodulation and FFT response relative to the center frequency, 20 to 30 °C)
Center frequency (GHz)
Span (MHz) Preselector Max. error RMS
< 3.6 ≤ 10 n/a ± 0.40 dB 0.04 dB nominal
≥ 3.6 ≤ 10 on 0.25 dB nominal
≥ 3.6 ≤ 10 off 2 ± 0.45 dB 0.04 dB nominal
> 26.5 (Option 532 or 544) ≤ 10 on 0.35 dB nominal
IF phase linearity (deviation from mean phase linearity, nominal)
Center frequency (GHz)
Span (MHz) Preselector Peak-to-peak RMS
< 3.6 ≤ 10 n/a 0.4° 0.1°
≥ 3.6 ≤ 10 off 0.4° 0.1°
≥ 3.6 (Option ≤ 526) ≤ 10 on 1.0° 0.2°
Data acquisition (10 MHz IF path)
Time record length IQ analyzer 4,000,000 IQ sample pairs
Sample rate at ADC
Option DP2, B40 or MPB 100 MSa/s
None of the above 90 MSa/s
ADC resolution
Option DP2, B40 or MPB 16 bits
None of the above 14 bits
1. Option MPB is installed and enabled.